It analyses your shit and cross checks against the Bristol stool chart.

It then has either Metamucil or a block of cheese delivered to your house as needed.

This is a guide for getting the rstp back for some of the wyse cameras. I haven’t used it myself https://houndhillhomestead.com/using-wyze-cam-v3s-with-frigate/. Someone else recommended thingno which I have read works but also haven’t tried.

One of the reasons wifi is discouraged is for anyone who lives in an apartments or even units, the wifi channels often very crowded. If you live in your own house it’s less of an issue but they still generate continual traffic. Having to punch through a few walls, as they will probably have to do if you are sitting them up outside, will have an effect too. As will the weather.

There are many tricks to running cable between floors. If you have down lights you can pop them out then use a bit of yellow tongue to poke between the holes, running the cable from light to light. most modern houses use pozi trusses for floor support and they have many openings for running services.

Or if you own the house just cut a few holes in the plaster. Patching and painting one ceiling not that big of a job and you’ll be able to use the same cameras for years and years instead of replacing when the battery dies.

If you get a PoE switch many cameras are designed to be run off of the power it can supply over an Ethernet cable. So you just have to run the Ethernet cable (pretty easy).

Also you can get splitters that will break that PoE cable into one Ethernet and a 12v barrel jack for cameras that are not designed to use PoE directly.

I can’t stress enough how much better a direct connection is than wifi, but understand that sometimes it is the only option.

Other benefits include simply unplugging the camera from the switch if it freezes up as this effectively switches it off (this can be done remotely if you have a managed switch.) and obviously higher quality, more stable streams.

Have a look through the frigate documentation before buying a device to run it. It needs some kind of gpu to process the frames for object identification. The most economical one in my opinion is a something intel 8th gen or higher like a hp elite desk mini pc that has a 2.5in sata slot with the igpu and ideally a proper spinning hdd for the recording as it is constantly being written to and an ssd will burn out faster.

If you want a local camera system you need a NVR (Networked Video Recorder). These have Ethernet ports and’s you connect security cameras to them over Ethernet, they record, store and allow you to view the footage.

A DVR does the same thing but will use a video signal to record, maybe coax or component. These are getting a bit old and also have lower limits on how far the video signal can travel than an NVR but work and are cheaper, many offer network access to view the cameras and recordings.

If you are looking at budget options you can use the software FrigateNVR. It is an open source NVR software designed to work with any camera that uses standard protocols (and many that don’t thanks to the active community). Including wireless cameras although everyone in the community recommends avoiding wireless cameras unless have no other options.

You will be able to use your wyze cameras will frigate.

Almost all IP Cameras, especially the cheap one are considered compromised and open to easy hacking. It is important to isolate them on their own VLAN, if you really care about privacy so they can only talk to your NVR.

It is important to remember security cameras are cameras and need light to perform, especially in the dark. If you need a camera to perform in no light situations you either rely on its own lights which will illuminate maybe 5-10m, and external light source like a flood light or you have a larger camera sensor that can drink in the ambient light for decent quality (this last option will only come from a camera that costs 200-300USD.

A cheap 4k (8mp) camera will perform worse in low light than a cheap 6mp as they often have the same size sensor.

“No evidence of arterial narrowing”

Well now I know she’s lying

also played the violent military-themed video game Call of Duty.

At least we know why he did it

Look, I’m not going to lie to you.

I coughed up the $7 for an extra month. it all seems to be there.

The ministry of truth told us to… (These are all 1984 references just to make sure we are all on the same page)

We’ve always been at war with Eastasia

“Don’t tell me what I want, you anti- American piece of shit! You terrorist!

You know, you use that word so much it’s lost all meaning, Mr. P(resident)

It’s like, at this point, what’s a terrorist? It’s a guy you don’t like. Big deal.”

-Rick and Morty

Sounds like a good time to deploy a bunch of small raspberry pi vpn nodes at local libraries and other free wifi spots. I don’t know enough about ip to know if they can track you past that first hop

It’s disappointing to see how fast a government can move when it’s something important, like holding onto power, compared to lesser goals like the safety and health of their people.

Some people feel its easier to have one for 4k and one for HD content. If you use overseer it allows you to designate 4k and HD versions of sonarr and radarr. Then you can give your users granular permissions around them.

Perhaps you would let them download whatever they want without approval in HD but if they want 4k they must wait for you to approve the request.

There is also no consensus on how to handle animated shows and live action. Some people recommend having a separate sonar instance with much lower quality definitions for animation others say you can make it work with custom formats and profiles.

Yes good clarification, TRaSH is almost synonymous with *arr in my head, but there is a chance someone got to this point without running into them.

Nb I use prowler to manage my indexers and point sonar/radarr at prowler but similar options should be available though sonar And radar.

You can limit the amount of queries and grabs your client will try per amount of time for each indexer. It is under advanced settings on the indexer page once you select an indexer.

This isn’t really a problem when you are just downloading one or two series but is a problem when you first start out and are downloading everything under the sun. Try limiting to 10 queries and grabs per hour for now. Might be a good idea to pause all requests for 24 hours as well as your ip may be temporarily flagged.

And yes I use flare solver for 1337

I also vaguely remember needing to have an account on ru tracker to make it work but it was all in Russian, and no English option I think. I had to use the browser auto translate

Use kickass.to, but they are just mirrors of each other.

I’d recommend setting up prowler now so you don’t have to do it all twice and if you want to spin up another radar or sonar later it’s easy to cover all your indexers.

Not sure about therarbg I can’t seem to add it either, despite having it as an active tracker.

What kind of errors? Usually issues are to do with incorrect quality profiles and custom formats.

If you don’t understand those then just follow the trash guides to the letter to start with.

To answer your actual question I use use the basics. Eztv, 1337, therarbg and kickass torrents. I rarely have any problems downloading mainstream stuff.

Fuck it, why not. What are the chances they try it three times in a row?

Are the social strides in the room with us now?

Albanese only looks passable because he’s standing next to the likes of abbot, Morrison and Turnbull

Best we can do is ask grok for a curriculum, let Elon edit its response, then pass it by a panel of lobbyists and the last koch brother